Product Benefits Produced in compliance with DIN/EN 490/491 with raised longitudinal interlock and much better quality characteristics than stipulated Overlapping side interlock and double base ribbing for optimum protection Impermeable to water, resistant to frost and deformation, dimensionally precise with high compressive strength Overlap: approx. 7.5 - 10.6 cm Standard roof pitch 22° Tiles per sqm: approx. 10 pcs. Colours & Surfaces LONGLIFE EasyLife Comparison of concrete roof tile surfaces LONGLIFE concrete roof tiles with high colour fastness and self-cleaning effect Smooth – including the exposed edge: The fine surface of LONGLIFE roof tiles opens up a bright future for Nelskamp roofs. The advanced LONGLIFE technology means that the exposed edge now also has low porosity for permanent protection of the entire rooftop – and a visually harmonious look. LONGLIFE roof tiles stay clean for a very long time – so they always look like new. Dirt, algae and moss cannot gain a hold, and rain acts like a shower for the roof. Weighing just around 3 kilos, the new "EasyLife" roof tile is about 30% lighter than conventional roof tiles. This makes it particularly easy to install and makes it suitable for statically weak roof trusses. The reduced weight is achieved by using a lightweight aggregate specially developed for Nelskamp, which does nothing to diminish its other technical characteristics. "EasyLife" is particularly suitable for renovation projects because its light weight puts hardly any strain on the roof's statics, and it isn’t normally necessary to modify the roof truss. The technical characteristics of the lightweight Sigma pantile, such as its breaking strength and frost resistance, are largely the same as those of the classic Sigma model. TOP 2000 S Concrete roof tiles with a high quality surface Active self-cleaning Colour fastness Abrasion resistance Effective anti-green growth coating LONGLIFE Concrete roof tiles with high colour fastness and self-cleaning effect – matt or gloss Active self-cleaning Colour fastness Abrasion resistance Effective anti-green growth coating The low-porosity surface structure prevents dirt particles from gaining a hold on LONGLIFE roof tiles – the rain simply washes them off. LONGLIFE technology delivers maximum resistance to UV radiation and weather effects. The result: permanent colour fastness. LONGLIFE roof tiles are extremely wear-resistant. Their optimised surface protects the roof tiles, including the exposed edge. The powerful self-cleaning effect also minimises the formation of lichen, moss and algae. All Surfaces Longlife matt EasyLife LONGLIFE matt dark grey EasyLife granite EasyLife black EasyLife brick red LONGLIFE matt brick red LONGLIFE matt bordeaux red LONGLIFE matt dark brown LONGLIFE matt granite LONGLIFE matt new red LONGLIFE matt black LONGLIFE matt bordeaux red LONGLIFE matt dark brown LONGLIFE matt dark grey LONGLIFE matt granite LONGLIFE matt new red LONGLIFE matt black LONGLIFE matt brick red EasyLife granite EasyLife black EasyLife brick red Colour deviations are possible due to different monitor settings. Gallery sigma objekt 01 sigma objekt 02 sigma objekt 03 sigma objekt 04 sigma objekt 05 sigma objekt 06 Technical Data Total width 33.2 cm Total length 42.0 cm Overlap 7.5 - 10.6 cm Tilling width 30.0 cm Tilling length 31.4 - 34.5 cm Tiles required per sqm 10.0 pcs. Weight per tile (Standard) 4.1 kg Weight per tile (EasyLife) 3.0 kg Weight per sqm (Standard) 41.0 kg Weight per sqm (EasyLife) 30.0 kg Standard roof pitch 22° All dimensions are approximate. Tolerances in compliance with DIN EN 490/491. Subject to change without notice.
