Accessibility Tools

  • Content scaling 100%
  • Font size 100%
  • Line height 100%
  • Letter spacing 100%

S-Tile PV for the concrete tile S-Tile

SOLAR TILE S-TILE PV

SOLAR TILE S-TILE PV

Do you want a new, modern roof covering with a traditional design, sustainability, and a profitable technology? The S-Tile PV system combines all three, and is hardly noticeable on the roof. The overlapping S-Tile PV modules, like the S-shaped tiles, lie directly on the roof lathing for a uniform and even overall appearance.

Product Benefits

The S-Tile PV module is supplied as a ready-to-install unit with the interlocking S-Tile seam at the side ends for easy, quick and safe installation. The variable overlap area permits a uniform roof layout, while the prefabricated cables with MC4 plugs allow for safe and simple connection of the powerful modules, which cover ca. 0,5m² of roof area.

  • Modules interlock with the roof tile Planum
  • Delivered as a ready to install unit
  • Hanging nib and side interlock for swift, easy and secure laying
  • Only 3 screws per module
  • 25mm variable cover length
  • Ca. 5m² roof area per kWp
  • Ca. 200Wp/m² roof area
  • Also available as a 90cm wide module allowing for max. roof area usage
  • Product guarantee: 10 years
  • Performance guarantee:
  • 10 years 90% of rated performance
  • 25 years 80% of rated performance
 

Colours & Surfaces

 
 

Technical Data

Module performance Pmax 93 Wp
Rated working current Im 12,70 A
No-load working voltage Voc 8,63 V
Short circuit current Isc 13,42 A
Maximum voltage Vmp 7,33 V
Maximum tested system voltage 1000 V
Recommended system voltage up to ca. 600 V
Temperature coeffizient Voc -0,26 %/°C
Temperature coeffizient Isc +0,046 %/°C
Temperature coeffizient Pmpp -0,3 %/°C
Hail resistance according to IEC 61215 + IEC 61730
Cell efficiency 22,1 %
Module weight 8,5 kg
Module measures

cover width 5 tiles ca. 1500 mm
cover length 315 mm - 340 mm

Roof pitch

25°

Plugs MC4
Module cable 2 x 4,0 mm² each 550 mm long
Min. counter batte height / rear ventilation min. 30 x 50 mm
October 2020 · technical information subject to change